Structural Analysis of the Redesigned Ice/Frost Ramp Bracket.
(05/01/2014)
This paper describes the interim structural analysis of a redesigned Ice/Frost Ramp bracket for the Space Shuttle External Tank (ET). The proposed redesigned bracket consists of mounts for attachment to the ET wall, supports for the electronic/instrument cables and propellant repressurization lines that run along the ET, an upper plate, a lower plate, and complex bolted connections. The eight nominal bolted connections are considered critical in the summarized structural analysis. Each bolted connection contains a bolt, a nut, four washers, and a non-metallic spacer and block that are designed for thermal insulation. A three-dimensional (3D) finite element model of the...
Tác giả: Phillips, D. R.; Dawicke, D. S.; Gentz, S. J.; Roberts, P. W.; Raju, I. S. |
Số trang: 26 |
Lĩnh vực: Xây dựng |
Năm XB: 2007 |
Loại tài liệu: Khác
Tài liệu cần xác thực trước khi tải
Tiêu đề | Tải về |
Structural Analysis of the Redesigned Ice/Frost Ramp Bracket. | Số trang: 0
| Loại file:
This paper describes the interim structural analysis of a redesigned Ice/Frost Ramp bracket for the Space Shuttle External Tank (ET). The proposed redesigned bracket consists of mounts for attachment to the ET wall, supports for the electronic/instrument cables and propellant repressurization lines that run along the ET, an upper plate, a lower plate, and complex bolted connections. The eight nominal bolted connections are considered critical in the summarized structural analysis. Each bolted connection contains a bolt, a nut, four washers, and a non-metallic spacer and block that are designed for thermal insulation. A three-dimensional (3D) finite element model of the bracket is developed using solid 10-node tetrahedral elements. The loading provided by the ET Project is used in the analysis. Because of the complexities associated with accurately modeling the bolted connections in the bracket, the analysis is performed using a global/local analysis procedure. The finite element analysis of the bracket identifies one of the eight bolted connections as having high stress concentrations. A local area of the bracket surrounding this bolted connection is extracted from the global model and used as a local model. Within the local model, the various components of the bolted connection are refined, and contact is introduced along the appropriate interfaces determined by the analysts. The deformations from the global model are applied as boundary conditions to the local model. The results from the global/local analysis show that while the stresses in the bolts are well within yield, the spacers fail due to compression. The primary objective of the interim structural analysis is to show concept viability for static thermal testing. The proposed design concept would undergo conti
|
miễn phí
|
© Copyright 2012 Trung tâm Thông tin Khoa học và Công nghệ - Sở Khoa học & Công nghệ TP. Cần Thơ
Địa chỉ: 118/3 Trần Phú - P.Cái Khế - Q.Ninh Kiều - TPCT
Điện thoại: 0292 3824031 Fax: 0292 3812352
|
|
Lượt truy cập:
(Website trong thời gian thử nghiệm)